![]() You also need to make sure the correct partition on the drive is the active one so it will find the boot.ini file when it tries to boot. You can't just move a drive from an IDE to a SATA, or even move the drive from the first IDE port to the second, add a drive to the machine, or even change the number of partitions on a drive. When I say exactly I mean precisely that, it needs to be in the same controller with the same drive order (no extra drives, no fewer drives either) with the same number of partitions etc. Lots of disk cloning software will do things like align the partitions on sector boundaries, add extra partitions or resize them or otherwise fiddle with partition data.Īlso, if you don't put the cloned disk back exactly the same place then you will get the inaccessible boot drive error. ![]() When you clone the drive, you theoretically duplicate everything on it but that is not inherently true unless you copy the drive in RAW mode. Those lines that contain "multi(0)rdisk(0)disk(0)partition(1)" specify the controller, the drive and the partition that is used to boot from. ![]() A typical boot.ini looks like:ĭefault=multi(0)rdisk(0)disk(0)partition(1)\WINNT ![]() ![]() In the old NT, there is a file called boot.ini that controlled the boot process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |